日々 | jp-struttin

BLOG

日々

1/1

website recreated!

2019/6/17 make

wall01_jp-struttin — 壁

2018/12/7 make

SKILSAW SPT70WT-01の写真 — SKILSAW SPT70WT-01

2018/11/9 make

jimmy diresta【ジミー・ディレスタ】

2018/11/1 日々

jp-struttin_first — 活動開始

2018/11/1 日々

category

archive

instagram

follow me on instagram
@jp.struttin

I made a new video🔨 Lately I've been immersed i

Happy birthday to me🎁 #icepick #giftforme Tha

Happy birthday to me🎁
#icepick
#giftforme
Thank you @jimmydiresta !

All I think about is bending. This is a piece of 1

All I think about is bending.
This is a piece of 1/4" oak strip.
I made a steam bending tool.
This looks easy and very difficult.
A shoddy kettle and a lack of understanding of how water vapor works in the first place was the cause of my failure. As a countermeasure, I dealt with the water vapor escaping from the lid by packing it up with rubber gloves and putting a weight on it.
If the water level is raised too high, steam does not come out of the spout properly.
The only thing I can say is that the kettle is super important!

曲げの実験の続き。
粗悪なヤカンと水蒸気のそもそもの仕組みの理解不足が失敗の原因だとわかった。
改善して、手のひらサイズの曲げまで成功。

#maker #Inspiration #makercommunity

I've made a lot of fails so far. (I've had about 3

I've made a lot of fails so far. (I've had about 3 days of failures.) This is a 12mm steel tube. This is an experiment for my next client work. I used a bearing I rescued from a broken grinder to test I made a bending roller.
I had to fill the tube with sand to make it look crushed. However, the crushed texture looks good as it has "power"!
余ってる革のカシメ台と過去にグラインダーから救出したベアリングを利用して、曲げローラーを作った。
鉄を触る様になってから、かけた力を逃す事が、かけた力以上に超重要だとわかった。
例えばきゅうりを切るときにすっと引けば形を維持したままスライスされたきゅうりができるみたいに。
ハンドルは不燃の日を待ってたビニ傘の持ち手。
どこまでどんくらい曲がるかのテスト。

#bendingtools
#maker

Instagram post 17885628616581835

Instagram post 17885628616581835

Day31「Makers camp」→完 I've been posting for

Day31「Makers camp」→完
I've been posting for 31 days, and to see Makers philosophies and workshops, and
I was really fun!

Priscilla ! Luke ! and all the makers of the world "BIG" Thank you!
and
Thank you #mayformakers !
@plsmithed